Deutz — 4.2 Tightening specifications

Technical data A07 099 Fuel filter to fuel filter console A08 001 Oil fillter/interchangeable filter A08 051 Oil cooler housing on crankcase A08 052 Oil cooler on oil cooler housing ID no.

Name A07 039 Pressure limiting valve to rail A07 040 Rail pressure sensor to rail A07 045 Fuel line (feed) to control block Fuel line (return) to rail A07 046 Fuel line (return) to control block A07 047 Fuel line (return) to cylinder head A07 087 Fuel filter console on oil cooler housing A07 090 Fuel pressure sensor to fuel filter console A08 015 Oil suction intake pipe/holder on oil pump A08 040 Lubricating oil pipe on exhaust turbocharger/ crankcase A08 044 Pipe nozzle (oil return) to turbocharger A08 046 Holding bracket (oil return) on crankcase Connection holder of the oil return line A08 058 Locking screw on oil cooler housing A08 091 Oil pressure switch on oil cooler housing A09 001 Coolant thermostat housing on cylinder head © 02/2010 OBJ_DOKU-21741-001.fm 15/18 ID no.

Name Screw type Notes / Remarks Series Pre-tensio- ning value Post- clamping value A07 039 Pressure limiting valve to rail Insert with mounting grease. TCD 2013 2V 100 Nm A07 040 Rail pressure sensor to rail Insert with mounting grease.

TCD 2013 2V 70 Nm A07 045 Fuel line (feed) to control block Hollow screw TCD 2013 2V 49 Nm Fuel line (return) to rail 39 Nm A07 046 Fuel line (return) to control block Hollow screw TCD 2013 2V 49 Nm A07 047 Fuel line (return) to cylinder head Hollow screw TCD 2013 2V 29 Nm A07 087 Fuel filter console on oil cooler housing TCD 2013 2V 30 Nm A07 090 Fuel pressure sensor to fuel filter console TCD 2013 2V 30 Nm A07 099 Fuel filter to fuel filter console Wet gasket with clean diesel fuel. hand tight approx.10 Nm A08 001 Oil fillter/interchangeable filter Oil gasket lightly.

TCD 2013 2V hand tight approx.10 Nm A08 015 Oil suction intake pipe/holder on oil pump TCD 2013 2V 22 Nm A08 040 Lubricating oil pipe on exhaust turbocharger/ crankcase Hollow screw TCD 2013 2V 39 Nm A08 044 Pipe nozzle (oil return) to turbocharger TCD 2013 2V 20 Nm A08 046 Holding bracket (oil return) on crankcase TCD 2013 2V 20 Nm Connection holder of the oil return line 20 Nm A08 051 Oil cooler housing on crankcase M8x50 M8x80 Observe tightening sequence. TCD 2013 2V 3 Nm 30 Nm A08 052 Oil cooler on oil cooler housing Collar screw Oil sealing ring lightly.

TCD 2013 2V 80 Nm 160 Nm A08 058 Locking screw on oil cooler housing with sealing ring TCD 2013 2V 80 Nm A08 091 Oil pressure switch on oil cooler housing TCD 2013 2V 30 Nm A09 001 Coolant thermostat housing on cylinder head TCD 2013 2V 30 Nm