SECTION 2 MAINTENANCE Page 44 CHECK AND REFILL AXLE OIL Carry out this procedure if there is any sign of oil on the axle case. Remove oil level plug (1). and check that the oil level reaches the bottom of the plug hole. if necessary, add oil through the hole of plug (2). * The type of lubricant used depends on the ambient temperature. Select according to the table “FUEL, COOLANT AND LUBRICANTS”. * Use the same procedure to check and add the oil for the front and rear axles. Carry out this procedure if there is any mud or dirt stuck around the breather. CLEAN AXLE CASE BREATHER Remove all mud and dirt from around the breather with brush.
l Clean the breathers of the front and rear axles in the same way.