SECTION 2 Page 52 MAINTENANCE ENGINE The engine oil pressure monitor flashes when engine speed is raised after completion of warm-up . Add the oil to the specified level . Replace the element - Check oil leakage from the pipe or the joint. Steam is emitted from the top of the radiator (the pressure valve). The radiator cooling water temperature monitor flashes. * Supply the cooling water and check leakage. . Replace the monitor. . Adjust fan belt tension. - Wash out inside of cooling system. - Clean or repair the radiator fin. . Replace the thermostat. . Replace the monitor. - Tighten the radiator cap firmly or replace the gasket of it.
The engine does not start when the starting motor is turned over. . Add fuel. - Repair where air is leaking into fuel system * Replace the injection pump or the nozzle. - Check the valve clearance. - Check engine compression pressure. - Refer to the section of electrical system. Exhaust gas is white or blue. * Adjust to specified oil quantity . Replace with specified fuel Exhaust gas occasionally turns black. * Clean or replace the air cleaner element . Replace the nozzle. * Check engine compression pressure. Combustion noise occasionally changes to breathing sound. * Clean and replace turbocharger . Replace the nozzle. Unusual combustion noise or mechanical noise.
- Replace with specified fuel. * Check over-heating. * Replace the muffler - Adjust valve clearance