Cummins — FUEL, COOLANT AND LUBRICANTS

Page 56 MAINTENANCE SECTION 2 FUEL, COOLANT AND LUBRICANTS PROPER SELECTION OF FUEL, COOLANT AND LUBRICANTS See NOTE 141 Fuel tank See NOTE (5) 383 (1) includes torque convarter, transfer and cools, ASTM. Amencan Scmety of Testing and Mareriai (2) includes brake SyStem SAE: Society 01 Automotive Engineers (3) inciudes diffeienteal and planetary gear ~a** API. American Petroleum institute Specified capacity’ Total amount of 011 including oil for components and oil tn peplng.

Reftll capacity Amount of ml needed lo refill system during normal inspection and maintenance NOTE (1) The use of quality engine lubricating oils combined with appropriate oil drain and filter change intervals is a critical factor in maintaining engine performance and durability. Cummins Engine Company, Inc. recommends the use of a high quality SAE 15W-40 heavy duty engine oil (such as Cummins Premium Blue) which meets the American Petroleum Institute (API) performance classification CE. * CC/CD or ZCD/SF engine oils can be used in areas where CE oil is not yet available A sulfated ash limit of 1.0 mass percent is suggested for optimum valve and piston deposit and oil consumption control.

The sulfated ash must not exceed 1.65 mass percent For further details and discussion of engine lubricating oils Cummins engines, refer to Bulletin No 3810340, Cummins Engine Oil Recommendations. The API service symbols are shown in the accompanying illustration The upper half of the symbol displays the appropriate oil categories; the lower half may contain words to describe oil energy conserving features.

The center section identifies the SAE oil viscosity grade * Alternate Oil Grades 1OW -20°C to 10°C (-4°F to SOOF] 30 4°C and above [39”F and above] 2OW -10°C to 25°C [14”F to 77”F] 40 10°C and above [5O”F and above] * The use of low viscosity oils, such as 1OW or low-30, can be used to aid in starting the engine and in providing sufficient oil flow at ambient temperatures below -5°C [23”F]. Continuous use of low viscosity oils can decrease engine life due to wear. (l-l) These oils are available commercially with better low temperature properties Consult your supplier