SECTION 3 Page 12 SAFETY AND OPERATION - Always travel directly up or down slopes. When I- traveling down a slope, use the same gear speed as when going up the slope. When traveling down a slope, never put the transmission in neutral. . If the engine stops on a slope, apply the brake quickly and carefully. Next, lower the work equipment to the ground and apply the parking .x/ brake. Then put the directional and speed control levers in neutral, and start the engine again. 14 - Be careful when traveling on planks or steel plates, as these can cause slippage. - When operating at night, remember the following: * Be sure to arrange an adequate lighting system.
* At night it is very easy to make mistakes in assuming the distance and height of objects and land.