Cummins — PARKING

SAFETY AND OPERATION SECTION 3 Page 13 PARKING * Before towing operations, always check the wire rope. * Before starting towing operations, make sure that no one is near the machine. Start the machine slowly to take up the slack in the wire rope. Then start towing carefully. Do not tow any machine whose brakes or steering have broken down. * When parking rhe machine, park it in a safe place outside the working area, or in the specified place. The following factors should be considered when choosing a parking place: it should be on flat firm ground where there is no danger of rockfalls, landslides or floods.

* If the machine has to be parked on a slope, it should be parked facing directly up or down the slope, and chocks should be placed under the tires. . When leaving the machine, always lower the work equipment completely to the ground, and put all control ievers in neutral. Next, apply the parking brake and lock all levers. Then put blocks under the tires. - After stopping the engine, always remove the starting key.