SECTION 3 SAFETY AND OPERATION Page 28 LOCKING CAP A locking cap is available as an optional fuel tank cap or hydraulic tank cap. Open and close locking Caps as follows: 1. To open the cap l Insert the key as far as it will go. If the key is turned before it is inserted all the way, it may break. 1) Insert the key into the cap 2) Turn the key counterclockwise and bring the rotor groove in line with the aligning mark on the cap. Turn the cap slowly until a “clicking” sound is made. This releases the lock and allows the cap to be opened. 2. To lock the cap 1) Turn the cap into place. 2) Turn the key clockwise and take the key out.
* When the cap is locked (against vandalism), it rotates freely. Aligning mark The fuel tank filler port is equipped with a lock. l Use the starting key to open and close the cap. ihoulder Ooen and close locking cap, as follows: I . To open the cap l 1. Insert the key as far as it will go. If the key is turned before it is insertad all the way, it may break. Insert the key into the cap 2. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. . To lock the cap 1. Turn the cap into place 2. Turn the key counterclockwise and take the key out.