SECTION 1 Page 41 OPERATION TO STOP THE ENGINE Run the engine at low idling speed for about 3 to 5 minutes to allow it to gradually cool down. Return starting switch (1) to the OFF position and remove the key. OFF If the engine is abruptly stopped before it has been cooled down, engine life may be greatly shortened. Consequently, do not abruptly stop the engine apart from an emergency. In particular, if the engine has overheated, do not abruptly stop it but run it at medium speed to allow it to cool gradually, then stop it. When working in water or on swampy ground, do not let the water come above the bottom of the axle housing.
MAXIMUM DEPTH OF WATER * After finishing the operation, wash and check the lubricating points. Axle housmg *FL IF WHEEL BRAKE DOES NOT WORK If the machine is not stopped by depressing brake pedal, use the parking brake to stop the machine.