Komatsu — CHANGING COOLANT

MAINTENANCE 3. Open radiator drain cock (2) (see fig.A), loosen drain valve (3) positioned on the filter carrier head. The coolant will flow out, col- lect it in a container with suitable capacity. Use a 12 mm wrenches. 4. Close radiator drain cock (2) (see fig.B), tighten valve (3) on the fil- ter carrier head, and fill the radiator with new coolant. (See “FUEL, COOLANT, AND LUBRICANTS” on page 3-7). 5. Start engine and let it idle for a few minutes; check the coolant level again. Add coolant, if necessary. Reinstall upper radiator cap (1). 6. Fill expansion tank (4) until the maximum level is reached, then close the engine hood. 3-54 WB140-2N, WB150-2N