2.50 FUEL MIXER FOR THE SERIES 60G LOW PRESSURE SYSTEM 2.50 FUEL MIXER FOR THE SERIES 60G LOW PRESSURE SYSTEM The venturi fuel mixer assembly consists of a die cast aluminum body with a spun aluminum venturi permanently inserted into it. The unit has no moving parts. The mixer assembly is attached to support brackets and located at the right rear of the engine. See Figure 2-144. 1. Air Balance Hose 7. Fuel Mixer Assembly 2. Air Inlet Tube 8. Pulse Width Modulated Stepper Motor Valve (PSV) 3. Thermostat Housing 9. Lube Oil Filters 4. Exhaust Manifold 10. Fuel Supply Hose 5. Fresh Water Pump 11. Fuel Balance Hoses 6. Turbocharger 12.
Low Pressure Regulator Figure 2-144 Low Pressure Fuel System (Series 60G Engine) (Rev. 2005) All information subject to change without notice. 2-252 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION