Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 2.50.1 Replacement of Fuel Mixer for the Series 60G (Low Pressure System) The fuel mixer is non-serviceable and should be replaced as a unit. No adjustment is required. 2.50.2 Removal of Fuel Mixer for the Series 60G (Low Pressure System) Remove the fuel mixer as follows: EXPLOSION To avoid injury from the explosion of natural gas, the engine must be kept in a well ventilated area away from open flames, sparks, and electrical resistance (heating) coils. 1. Vent fuel system; refer to section 2.51.1and refer to section 2.51.2. 2. Disconnect and remove the PSV from the fuel mixer, refer to section 2.44.2. 3. Remove four fuel mixer mounting bolts. 4.

Separate and remove the fuel mixer from the mounting bracket. 2.50.3 Disassembly of Fuel Mixer for the Series 60G (Low Pressure System) Disassembly of the fuel mixer is not required. 2.50.4 Cleaning of Fuel Mixer for the Series 60G (Low Pressure System) Cleaning of the fuel mixer is not required. 2.50.4.1 Inspection of Fuel Mixer for the Series 60G (Low Pressure System) Inspection of the fuel mixer is not required. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 2-253