SERIES 60 SERVICE MANUAL The oil cooler housing coolant outlet uses one large rubber O-ring seated in a groove in the outlet neck. See Figure 3-25. 1. Pipe Plugs (5) 9. O-ring 2. Fitting 10. Bolt, Oil Cooler Housing-to-Adaptor (7) 3. O-rings (2) 11. Gasket, Oil Cooler-to-Housing 4. Oil Cooler 12. Oil Filter Adaptor 5. Bolt, Oil Cooler Housing-to-Adaptor (3) 13. O-ring 6. Oil Cooler Housing 14. O-ring 7. Pipe Plugs (4) 15. Bolt, Oil Filter Adaptor-to-Block (5) 8.
Pipe Plug Figure 3-25 Oil Cooler Housing and Related Parts (1991 and Later Engines) Two small O-rings are positioned in oil filter adaptor counterbores to seal the lubricating oil passages between the oil filter adaptor and the cooler core. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 3-51