Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

3.8 OIL COOLER (1991 AND LATER ENGINES) The oil cooler housing is attached to the oil filter adaptor. The flow of oil is from the oil pump, through a vertical passage in the cylinder block, through the full-flow oil filters and then through the oil cooler core and the cylinder block main oil galleries. 3.8.1 Repair or Replacement of Oil Cooler To determine if repair is possible or replacement is necessary, perform the following procedure. See Figure 3-26. Figure 3-26 Flowchart for Repair or Replacement of Oil Cooler (Rev. 2005) All information subject to change without notice. 3-52 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION