SERIES 60 SERVICE MANUAL 16. Install a new water seal over the drive shaft and seat it in the water pump housing. See Figure 4-24. Figure 4-24 Water Seal Insertion (GCM) Detroit Diesel previously released a water pump coolant seal which required the use of seal installer (J–35517–1A, part of tool set J–35988–C). This seal went into effect with engine serial number 06R670637 thru 06R698567 for On-Highway applications, and can be used with both the former style (front mounted) water pump as well as the current style (gear case mounted) water pump. The former coolant seal is no longer serviced. The new coolant seal is used after engine serial number 06R698567 for On-Highway applications.
The new coolant seal requires the use of seal installer (J–35988–19); do not use seal installer (J–35517–1A) with the new coolant seal. 17. Position J–35988–19 (part of tool set J–35988–C) over the water seal. See Figure 4-25. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 4-23