Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

6.6 TURBOCHARGER SERIES 60 NATURAL GAS (AUTOMOTIVE) ENGINE 2. Set-up an indicator at the end of the wastegate actuator adjusting rod to measure actuator rod travel. The indicator should have a minimum travel of 2.54 mm (0.100 in.). 3. Connect regulator and pressure gage set-up to wastegate actuator. See Figure 6-30. 1. Hose to Wastegate Actuator 4. Supply Air Shutoff Valve 2. Vent Valve 5. Pressure Regulator 3. Pressure Gage 6. Shop Air Supply Figure 6-30 Checking Wastegate Calibration for the Series 60G Automotive Engine (Rev. 2005) All information subject to change without notice. 6-54 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION