1.5 ENGINE LIFTER BRACKETS 1.5.2 Removal and Cleaning of Lifter Bracket Perform the following steps for lifter bracket removal: 1. Remove the bolts securing the lifter bracket to the engine. 2. On applications with the integral fan support and engine lifter bracket, remove the fan. Refer to section 1.10.2. 1.5.2.1 Inspection of Lifter Bracket Perform the following for lifter bracket inspection: FALLING ENGINE To avoid injury from a falling engine, do not use a damaged lifter bracket when lifting the engine. 1. Inspect the lifter brackets for cracks, bending or other damage. 2. Replace the bracket if any of these conditions exist.
1.5.3 Installation of Lifter Bracket Perform the following steps for lifter bracket installation: 1. Install the bracket to the engine. Torque the mounting bolts to 101-126 N·m (75-93 lb·ft). 2. Install the fan support, heat exchanger support, or charge air cooler support bracket, refer to section 1.10.3. (Rev. 2005) All information subject to change without notice. 1-110 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION