1.9 CRANKSHAFT MAIN BEARINGS 1.9 CRANKSHAFT MAIN BEARINGS The crankshaft main bearing shells are precision made and are replaceable without machining. They consist of an upper bearing shell seated in each cylinder block main bearing support and a lower bearing shell seated in each main bearing cap. See Figure 1-141. 1. Upper No. 6 Thrust Washers 8. Main Cap No. 1, 2, 3, 4, 5 & 7 2. Crankshaft 9. Lower Thrust Bearing Shell 3. Lower No. 6 Thrust Washers 10. Woodruff Key 4. Lower No. 6 Thrust Bearing Shell 11. Upper Thrust Bearing Shell No. 1, 2, 3, 4, 5 & 7 5. Washer 12. Cylinder Block 6. Bolt 13. Upper No. 6 Thrust Bearing Shell 7. No.
6 Main Cap Figure 1-141 Main Bearing Caps, Bearing Shells and Crankshaft Thrust Washers (Rev. 2005) All information subject to change without notice. 1-164 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION