Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 9. When the inside surface of the housing is seated firmly against the base and spacers the seal and sleeve are properly installed. Remove tools. 10. Measure the face squareness of the outside diameter of the crankshaft seal using a runout gage installed on the crankshaft. If the total indicator reading is more then 0.762 mm (0.030 in.) the seal must be removed and a new seal installed. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-163