1.10 GEAR CASE COVER PRE-EXHAUST GAS RECIRCULATION (EGR) 1. Engine Lifter Bracket 3. Gear Case Housing 2. Gear Case Cover Figure 1-163 Engine Gear Case Cover Support NOTE: There is a rubber O-ring installed between the center of the bull gear hub and the gear case cover. The O-ring may adhere to the cover when it is removed. Be sure the O-ring is not lost. See Figure 1-164. Figure 1-164 Bull Gear O-ring 15. Tap the gear case cover with a fiber mallet or plastic hammer to loosen it from the gear case. Remove the engine gear case cover. (Rev. 2005) All information subject to change without notice. 1-184 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION