SERIES 60 SERVICE MANUAL 23. Remove the 21 bolts securing gear case cover to gear case; remove gear case cover see Figure 1-182. Figure 1-182 Gear Case Cover Bolt Locations 1.11.2.1 Inspection of Gear Case Cover EGR Model Inspect the gear case cover as follows: 1. Clean all of the old gasket sealer from the mating surfaces of the gear case and gear case cover. Refer to “Cleaning” in the GENERAL INFORMATION Section. 2. Clean the gasket sealer from the mating surfaces of any components or access covers that were removed from the gear case cover, and the gear case cover itself. All information subject to change without notice. (Rev.
2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-201