SERIES 60 SERVICE MANUAL 2. Install two guide studs ( J–36107) to the gear case. See Figure 1-183. 1. Gear Case Cover 4. Gear Case 2. Guide Studs 5. Gear Case Alignment Dowel 3. Gear Case Alignment Dowel Figure 1-183 Gear Case and Gear Case Cover 3. Position the gear case cover onto the guide studs and slide gear case cover to the mating surface of gear case. Index the two dowels in the gear case. See Figure 1-183. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-203