Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.12 GEAR CASE PRE-EXHAUST GAS RECIRCULATION (EGR) An opening is provided in the center of the gear case, for the bull gear and camshaft idler gear assembly, which bolts directly to the engine block. See Figure 1-199. Figure 1-199 Bull Gear and Camshaft Idler Gear Assembly An access cover is provided at the rear of the gear case on the cooler (right) side of the engine. This access cover provides an opening for inspection of the accessory drive assembly drive gear. See Figure 1-200. NOTE: This access cover opening may be cast closed on the rear of the gear case.

Figure 1-200 Accessory Drive Gear Access Cover (Pre-1991 Engines) For gear lash measurement and adjustment procedures for the gears in the engine gear train, Refer to section 1.24.2.1. (Rev. 2005) All information subject to change without notice. 1-216 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION