SERIES 60 SERVICE MANUAL An oil gallery is drilled in the gear case casting, for lubrication of the adjustable idler gear assembly. A hole in the front of the cylinder block, indexes with the gear case gallery. At the edge of the gear case the gallery is threaded for insertion of a plug. An exit hole feeds the adjustable idler gear assembly. See Figure 1-201. NOTE: Do not use the oil plug location for an oil supply or for checking oil pressure. Figure 1-201 Adjustable Idler Gear Lubrication Gallery All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-217