Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 5. Remove the 3 bolts that secure the camshaft gear pilot tool (J–35906) to the gear case and remove the tool. 6. Remove the three bolts securing the former right side gear case stiffening bracket, or two bolts securing the current right side gear case stiffening bracket. See Figure 1-203. Figure 1-203 Gear Case Stiffening Bracket (Right Side) 7. Remove the three bolts securing the left side gear case stiffing bracket. See Figure 1-204 Figure 1-204 Gear Case Stiffening Bracket (Left Side) 8. Remove gear case cover. Refer to section 1.10.2, for step 1 through step 13. Supporting the gear case cover with a suitable lifting device, but don't remove it. 9.

Remove the fuel pump from the fuel pump drive assembly (or air compressor). Refer to section 2.8.2. 10. Remove the air compressor. Refer to section 11.1.5. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-219