Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.14 CRANKSHAFT VIBRATION DAMPER 1.14.2 Cleaning and Removal of Crankshaft Vibration Damper Precleaning is not necessary. PERSONAL INJURY To avoid injury from the projection of tools or other objects that may fall on or behind the vibration damper of an engine, always check and remove these items before starting the engine. Remove crankshaft vibration damper as follows: 1. Remove the drive belts from the crankshaft pulley. Refer to section 14.6.9. 2. Remove the inspection plug in the bottom of the flywheel housing and install the flywheel lock (J–36375)–A. See Figure 1-234. Figure 1-234 Flywheel Lock (Rev. 2005) All information subject to change without notice.

1-246 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION