SERIES 60 SERVICE MANUAL The forged steel cross-head piston is two-piece piston consisting of a dome and a skirt. The dome and skirt are held together by the piston pin. Ring grooves are machined in the piston dome. See Figure 1-270. 1. Piston Pin 6. Oil Ring Expander 2. Piston Skirt 7. Oil Control Ring 3. Snap Ring 8. Compression Ring 4. Piston Pin Bushing 9. Fire Ring 5. Piston Dome Figure 1-270 Forged Steel Piston and Related Parts All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-289