Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.19 PISTON AND PISTON RING 1.19.2 Removal and Cleaning of Piston and Piston Ring Refer to section 1.21.2 for piston and connecting rod assembly removal procedure. 1.19.3 Disassembly of Piston and Piston Ring Disassemble the piston and piston rings as follows: 1. Remove the piston rings with piston ring expander tool.See Figure 1-275. Figure 1-275 Removal of Piston Rings NOTICE: The pin, bushing, skirt and dome must be match-marked to assure proper position and orientation. 2. Withdraw the piston pin and mark the front of the piston with a paint pencil, so it can be returned to the correct cylinder location. NOTE:

Steel pistons will require the removal of the circlip before withdrawing the piston pin. (Rev. 2005) All information subject to change without notice. 1-294 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION