Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.20 ONE-PIECE PISTON ASSEMBLY AND PISTON RING 2. Install the oil control ring by hand. See Figure 1-279. NOTE: The oil control ring may be installed in either direction. NOTE: Install expander into inside diameter groove of ring with expander spring gap located 180° from the oil control ring gap. Figure 1-292 Oil Control Ring Installation (Diesel) NOTE: The oil control ring expander has a identifying paint stripe. Make sure the paint mark can be seen after the oil control ring is installed at ring gap. (Rev. 2005) All information subject to change without notice. 1-316 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION