Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL Install the fire and compression rings as follows: NOTICE: To avoid breaking or overstressing the rings, do not spread them any more than necessary to slip them over the piston dome. 1. Starting with the compression ring (second groove), install the compression ring and fire ring with tool (J–8128). See Figure 1-293. Make sure the identifying dimple on the rings is installed up, toward the dome of the piston. See Figure 1-286 for ring identification and locations. 2. Stagger the ring gaps around the piston. see Figure 1-293. Figure 1-293 One-Piece Piston Ring Positioning (Diesel) 3. Refer to section 1.21.4 for piston and connecting rod assembly procedure.

All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-317