1.21 PISTON AND CONNECTING ROD ASSEMBLY 12. Install connecting rod guides (J–35945). Install oil nozzle protectors (J–43661) over the ends of the connecting rod bolts to prevent damaging the crankshaft journals or the joint face of the rod. The guides also prevent the connecting rod from contacting the liner and damaging the surface. See Figure 1-306. Figure 1-306 Connecting Rod Guide and Oil Nozzle Protector Installation NOTE: The oil nozzle protectors (J-43661) are threaded at the upper end and attach to the rod bolts. (Rev. 2005) All information subject to change without notice. 1-332 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION