SERIES 60 SERVICE MANUAL 1.23.2 Removal and Cleaning of Cylinder Liner Precleaning is not necessary. NOTICE: Refer to Section 1.21.2 for removal of 14L and 12.7L EGR ON-Highway Cylinder Liner, Piston and Connecting Rod assembly. NOTICE: The proper method must be followed when removing a cylinder liner. Damage to the liner and the cylinder block may occur if the proper tools and procedures are not used. 1. Remove the piston and connecting rod as an assembly. Refer to section 1.21.2. 2. Remove the cylinder liner with cylinder liner remover (J–45876). See Figure 1-334. Figure 1-334 Cylinder Liner Removal Tool (J–45876) [a] Ease the liner removal tool down into the liner.
[b] Turn the nut on tool (J–45876). in a clockwise direction to remove liner from the block. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-365