Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 7. Remove bolt from front of camshaft gear cover. See Figure 1-384. 1. Bolt 2. Camshaft Gear Cover Figure 1-384 Camshaft Gear Cover Bolt NOTE: If timing is correct and the repair being made does not require that the engine is turned over, clean off an area where the camshaft gear and idler gear teeth mesh and mark the teeth with a suitable marker for a reference point when reassembling the camshaft. This procedure will make assembly easier. 8. Remove four camshaft gear cover bolts (1). See Figure 1-385. 1. Bolt Figure 1-385 Camshaft Gear Cover Bolts All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-427