SERIES 60 SERVICE MANUAL NOTICE: Do not bar the engine over with the timing pin installed. The timing pin will break. 4. Ensure the timing pin is installed in the bracket on the front gear case cover and into crankshaft timing hole. See Figure 1-395 . 1. Timing Pin Figure 1-395 Crankshaft Timing Pin 5. If the adjustable idler gear was removed or replaced, remove the cover plate and loosen the three hub retaining nuts so the gear hub can be easily moved. Install the centering tool All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-437