1.26 CAMSHAFT GEAR ASSEMBLY SERIES 60 EXHAUST GAS RECIRCULATION (EGR) MODEL (J–46306–A) to hold idler gear hub at the middle of travel This procedure will assist in correctly installing the camshaft gear. See Figure 1-396. Figure 1-396 Idler Gear Centering Tool J–46306–A 6. Ensure two seals are properly installed in camshaft gear cover. See Figure 1-397 . Figure 1-397 Camshaft Cover Seals (Rev. 2005) All information subject to change without notice. 1-438 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION