Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 1.30 ADJUSTABLE IDLER GEAR ASSEMBLY The adjustable idler gear is a straight-cut gear, mounted on a bushing pressed into the center of the gear, which in turn is supported on a stationary hub. The hub is secured to the gear case by a retaining plate, three studs, and locknuts. The studs are pressed into the gear case from the rear, and the flanged locknuts are installed after the gear, hub and hub retaining plate are installed. See Figure 1-450. 1. Locknut, Adjustable Idler Gear (3) 4. Idler Hub, Adjustable 2. Retaining Plate, Adjustable Idler Gear Hub 5. Gear Case 3. Gear Assembly, Adjustable Idler 6.

Stud, Adjustable Idler Gear (3) Figure 1-450 Adjustable Idler Gear and Related Parts The adjustable idler gear is pressure lubricated by engine oil fed to a gallery drilled into the gear case. This gallery indexes with the cylinder block oil gallery. See Figure 1-451. Figure 1-451 Adjustable Idler Gear Oil Gallery Location All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-503