SERIES 60 SERVICE MANUAL Remove the adjustable idler gear assembly as follows: 1. Drain the cooling system. Refer to section 14.6.4. 2. Drain the engine lubricating oil. Refer to section 14.6.1. 3. Remove the oil pan. Refer to section 3.11.2. 4. Remove the gear case cover. Refer to section 1.10.2. 5. Secure J–36237 to the front of the crankshaft. See Figure 1-456. Figure 1-456 Barring Engine Over All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-507