1.33 BULL GEAR AND CAMSHAFT IDLER GEAR ASSEMBLY 1.33.2 Removal of Bull Gear and Camshaft Idler Gear Assembly Remove the bull gear and camshaft idler gear assembly as follows: 1. Remove the engine gear case cover. Refer to section 1.10.2. 2. Install J–35994 to the oil seal contact area of the crankshaft. See Figure 1-474. Figure 1-474 Bull Gear Guide Studs (Rev. 2005) All information subject to change without notice. 1-530 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION