SERIES 60 SERVICE MANUAL 2. If removed, install the key to the keyway. Tap the key with a plastic mallet or brass hammer to seat. See Figure 1-489. Figure 1-489 Key-to-Keyway Installation 3. Index the keyway of the timing wheel with the key in the crankshaft. Slide the timing wheel onto the crankshaft, with the word OUT on the timing wheel facing you, as far as it will go without forcing it. See Figure 1-490. Figure 1-490 Timing Wheel Installation 4. Coat the bore of the crankshaft timing gear with a film of Lubriplate. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-551