Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.34 CRANKSHAFT TIMING GEAR AND TIMING WHEEL 5. Index the keyway of the crankshaft timing gear with the Woodruff key in the crankshaft. Tap the gear with a plastic hammer or fiber mallet, to ensure that the key is started in the keyway. See Figure 1-491. Figure 1-491 Crankshaft Timing Gear Indexing 6. Install the three guide studs (J–35642–2, part of tool set J–35642) to the threaded holes in the crankshaft timing gear. Tighten the three legs, but do not torque. See Figure 1-492. Figure 1-492 Puller and Leg Installation (Rev. 2005) All information subject to change without notice. 1-552 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION