SERIES 60 SERVICE MANUAL 1.35 ACCESSORY DRIVE The accessory drive assembly is mounted to the front of the gear case cover and utilizes a two-groove pulley to drive the alternator. See Figure 1-496, and see Figure 1-497. 1. Locknut 8. Drive Gear 2. Mounting Bolts (5) 9. O-ring 3. Drive Housing 10. Gear Case Cover 4. Snap Ring (Small) 11. Bearing Inner Race 5. Ball Bearing 12. Needle Bearing 6. Snap Ring (Large) 13. Oil Seal 7. Drive Shaft 14. Pulley Figure 1-496 Accessory Drive Assembly Related Parts (Former Design) All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-557