SERIES 60 SERVICE MANUAL 23. Assemble a dial indicator and magnetic base, so that the indicator stem rests on the face of the accessory drive gear just inboard of the drive gear teeth. See Figure 1-524. 24. Zero the dial indicator. 25. Rotate the drive gear two full rotations. See Figure 1-524. As the gear is rotated, the dial indicator needle may register both to the left and right of zero. 26. The total amount the dial indicator needle moves to the left and right of zero, added together, gives the total indicated run-out (TIR). The specified TIR is 0.04 mm (0.0015 in.). All information subject to change without notice. (Rev.
2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-583