SERIES 60 SERVICE MANUAL NOTE: All engines built after serial number 06R0004455 have the correct engine parts for engine brake installation. The model numbers have changed because of design changes in the engine brakes. NOTE: All Series 60 engines with serial numbers 06R0004455 or higher are Jake Brake ready. Do not install a Jake Brake on engines with lower serial numbers. Effective August 10, 2000, Model 795 Jake Brakes are used on all Series 60 engines requiring an engine brake. Former Jake Brake production models for the Series 60 engine were the 760A (which replaced model 760), 760B, 765, 765A, 770 and 790. Detroit Diesel engine model Nos.
6067GU28 and 6067GK28 are for bus/coach applications. Due to interference fits on some coach chassis, a two-housing Jake Brake kit may be required. Contact your Detroit Diesel Distributor for information on these kits. Jake Brake® is a registered trademark of Jacobs Vehicle Systems. J-Lash™is a trademark of Jacobs Vehicle Systems. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-587