1.36 JAKE BRAKE Energizing the engine brake effectively converts a power-producing diesel engine into a power-absorbing air compressor. This is accomplished through motion transfer using a master-slave piston arrangement which opens cylinder exhaust valves near the top of the normal compression stroke, releasing the compressed cylinder charge to exhaust. See Figure 1-527. 1. Exhaust Valve 7. Oil In 2. Slave Piston Assembly 8. Check Valve (Model 760) 3. Exhaust Valve 9. Solenoid Valve 4. Leveling Screw 10. Control Valve 5. Slave Piston Adjusting Screw 11. Master Piston 6. Accumulator 12.
Injector Pin and Roller Figure 1-527 Jake Brake Schematic The blowdown of compressed air to atmospheric pressure prevents the return of energy to the engine piston on the expansion stroke, the effect being a net energy loss, since the work done in compressing the cylinder charge is not returned during the expansion process. Exhaust blowdown occurs as the energized solenoid valve permits engine lube oil to flow under pressure through the control valve to both the master piston and the slave piston. See Figure 1-527. Oil pressure causes the master piston to move down, coming to rest on the injector rocker arm roller.
The injector rocker arm begins its travel as in the normal injection cycle, moving the master piston upward and directing high-pressure oil to the slave piston. The ball check valve in the control valve traps high-pressure oil in the master-slave piston system. (Rev. 2005) All information subject to change without notice. 1-588 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION