Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 2. Remove adjusting screw from housing. See Figure 1-534. 1. Jake Brake Assembly 2. Slave Piston Adjusting Screw Figure 1-534 Removing Slave Piston Adjusting Screw Remove the solenoid valve as follows: NOTICE: To avoid possible engine damage, do not disassemble or tamper with the solenoid valve. 1. Disconnect solenoid valve harness. 2. Using a 7/8 in. socket and extension for former solenoids or a 3/4 in. 6 point socket and extension for current solenoids, unscrew solenoid valve. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-597