Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 2. Remove the master piston. See Figure 1-538. NOTE: Use needle-nose pliers, if necessary. 1. Washer and Screw Assembly 3. Master Piston 2. Jake Brake Assembly 4. Master Piston Spring Figure 1-538 Removing the Master Piston On Model 760 only, remove the ball check valve as follows: 1. Remove the plug. 2. Remove the ball check valve and spring. Remove the slave piston as follows: 1. Remove the screw and washer that retains the slave piston return spring. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-601