Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

1.36 JAKE BRAKE 2. Remove the bridge and the slave piston. See Figure 1-539. 1. Slave Piston Bridge 4. Return Spring 2. Jake Brake Housing 5. Washer 3. Slave Piston 6. Screw Figure 1-539 Removing Bridge and Slave Piston 3. Loosen the leveling screw locknut and remove the leveling screw from the bridge. See Figure 1-540. 1. Slave Piston Bridge 2. Slave Piston Leveling Screw Figure 1-540 Removing the Leveling Screw from the Bridge The injector rocker arm contains a pin and roller for actuating the engine brake master piston. If excessive wear or damage to the roller is present, replace the rocker arm assembly. Refer to section 1.6.2. (Rev.

2005) All information subject to change without notice. 1-602 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION