SERIES 60 SERVICE MANUAL 1. Install the ball check valve and spring. See Figure 1-545. 1. Ball Check Valve 3. Pipe Plug 2. Spring Figure 1-545 Installation of Ball Check Valve 2. Insert the plug. Torque pipe plug to 11.2 N·m (8.3 lb·ft). Install the slave piston as follows: 1. Install the screw from the slave piston side of the bridge. 2. Install the leveling screw locknut. All information subject to change without notice. (Rev. 2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-609