1.36 JAKE BRAKE 2. Insert master piston into bore. See Figure 1-544. 1. Washer and Screw Assembly 3. Master Piston 2. Jake Brake Assembly 4. Master Piston Spring Figure 1-544 Inserting Master Piston into Bore 3. Install spring, washer, and screw. NOTE: Make sure spring legs are centered around master piston boss. 4. Torque screw to 10 N·m (7.4 lb·ft). On model 760 only, install the ball check valve as follows: (Rev. 2005) All information subject to change without notice. 1-608 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION