1.36 JAKE BRAKE [d] The DDC bolt shoulder is much longer, 17.0 mm (0.669 in.) versus 4 mm (0.157 in.) than the Jake Brake bolt. See Figure 1-550. Figure 1-550 Jake Brake and DDC Bolt Identification NOTICE: The model 760 uses two lengths of capscrews. Six 120 mm bolts should be installed on the exhaust side of the engine. Three 110 mm bolts should be installed on the camshaft side of the engine. Failure to do so will result in engine damage. 6. On model 760, install one washer onto each 120 mm (4.72 in.) bolt, and insert into brake housing on the exhaust manifold side (two per housing). See Figure 1-551. 1. Washer 2.
Long Bolt Figure 1-551 Installation of Jake Brake Housing Bolts on Exhaust Manifold Side (Rev. 2005) All information subject to change without notice. 1-614 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION