Detroit Diesel — Print Preview - C:\DOCUME~1\llakso01\LOCALS~1\Temp\.aptcache\S600507006\S600507

SERIES 60 SERVICE MANUAL 7. On model 760, install one washer on the 110 mm (4.331 in.) bolt, and insert into brake housing at the camshaft side (one per housing). See Figure 1-552. 1. Jake Brake Housing Assembly 2. Capscrew Figure 1-552 Installation of Jake Brake Housing Bolts on Camshaft Side 8. On models 760A, 760B, 765, and 765A, lubricate each hold down bolt with clean engine oil. NOTE: All the housing capscrews for these models are the same length of 110 mm (4.331 in.). 9. On models 760A, 760B, 765, and 765A, install a washer on each bolt, and install into housings (three bolts per housing). All information subject to change without notice. (Rev.

2005) 6SE483 0507 Copyright © 2005 DETROIT DIESEL CORPORATION 1-615